How To

We know things aren't always as straightforward as they seem, so we've created these handy tutorials to minimize time spent faffing and maximize your time on the trails! We recommend having your goggles relatively clean and your hands free of dirt before performing these changes.

ALTA MTB GOGGLE LENS CHANGE

STEP 1: Turn lens clips 90 degrees outwards

STEP 2: Gently pull nose bridge and upper middle portion of frame apart until an audible 'click' is heard

STEP 3: Pop lens out from the inside

STEP 4: Using supplied microfibre line up side slots with lens clips and position lens in place

STEP 5: Gently push lens into frame slots, in a clockwise order

STEP 6: Turn lens clips 90 degrees inwards

ALTA MTB GOGGLE STRAP CHANGE

STEP 1: Push strap tab inward from frame using a fingernail

STEP 2: Remove upper portion of strap from frame

STEP 3: Slide lower portion of strap from frame

STEP 4: Repeat steps 1-3 on the other side of the goggle

STEP 4: Insert lower portion of strap into frame

STEP 5: Insert upper portion of strap into frame

STEP 6: Gently pull strap until an audible 'click' is heard

STEP 7: Repeat steps 4-6 on the other side of the goggle

NITA LENS CHANGE

STEP 1: Pull apart nose piece and upper middle portion of frame

STEP 2: Unclick other portions of frame

STEP 3: Remove lens completely

STEP 4: Insert lens into nose piece of frame

STEP 4: Click lens into side portions of frame

STEP 5: Ensure no gap is observed on sides and top of frame